Product Presentation Reflectors with Striped Finish Are you looking for a well-designed alternative to the widespread reflectors for compact fluorescent lamps with smooth unstructured inner surface? Then have a look at our models with a striped inner surface. The most striking feature are the vertical facets on the whole reflector. Their length results from the height of the reflector as they expand over the whole surface of the paraboloid. With a width of only 5 to 7mm they convey the high quality look of your downlight. The ACL standard reflector programme includes the following models with a striped finish: Diameter Height Lamp Types used Catalogue 160 mm 80 mm TC-S, TC-D, TC-T page 30 160 mm 113 mm TC-S, TC-D, TC-T page 32 195 mm 156 mm TC-D, TC-T page 39 228 mm 136 mm TC-D, TC-F, TC-T page 43

For further information about our striped reflectors please contact our sales staff by clicking here.

Product Improvement Spotlight Reflectors 4190, 4191 and 4192 with Engraving Have you had problems in differentiating between our models from our series of reflectors for metal halide lamps CDM-TC or HCI-TC due to identical dimensions and partly matching finishes? Well, no more! As of 3 February 2003 these models are labeled with the terms "SPOT", "MEDIUM" and "FLOOD" indicating the respective light distribution characteristic.     Order Codes Beam distribution Engraving 4190(S)HGL FAC narrow SPOT 4190-G(S)HGL FAC narrow SPOT 4191(S)HGL FAC medium MEDIUM 4191-G(S)HGL FAC medium MEDIUM 4192(S)SS FAC wide FLOOD 4192-G(S)SS FAC wide FLOOD The indication of the type of beam distribution is located - easily visible - on the flange of the reflector opening.

For further information please contact our sales staff by clicking here.

Our Service
Reflector Design

Benefit from our know how in designing reflectors and louvres. We design reflectors and louvres fulfilling your specific needs. For this we only need information on the lamp used, a description of the technical requirements as well as - if available - concrete information on the installation details.

Our latest developments have been:

• Round reflectors for metal halide lamp Philips CDM-TC
• Round reflectors for metal halide lamp
  General Electric CMH 20W
• Round reflector for Xenon bulb Philips D2S 85V 35W
• Wallwashers for Osram T5 FQ 24/39/54W
  

For further information please contact our sales staff by clicking here.